I can't enter the system even if I press f8 when I turn on the computer.

Sometimes, when we start the computer, we occasionally encounter some failures. For example, some users’ computers start up. After that, the joke error code 0xc0000428 will appear. You can’t enter the system no matter what. Even if you choose to pre ss the F8 key, it will have no effect. So how to fix the problem that the computer cannot enter the system with 0xc0000428 and pre ss F8? Next, the editor will tell you the specific solution.

Recommended download:

Method 1.

1. If 0xc0000428 appears and you cannot enter the system by pre ssing F8, we must solve this problem.

2. Then we know that this is caused by system file corruption.

3. Therefore, to solve the problem of 0xc0000428 being unable to enter the system by pre ssing f8, we need to reinstall the system.

4. We can first use the U disk to enter the PE system and copy the things we want in the C disk.

5. Then use reinstallation to solve the problem of 0xc0000428 and being unable to enter by pre ssing f8.

6. At this time, we can reinstall here and see that the system has been repaired.

7. After reinstallation, restart the software and you will see that the problem of 0xc0000428 being unable to enter the system by pre ssing f8 has been solved.

Method 2.

1. When method 1 cannot solve the problem, we can use the USB disk to reinstall the system. At this time, you must first have a normal computer and a USB flash drive larger than 10GB. Then make the USB disk into a PE boot tool. The editor here recommends everyone to use Fat Claw's one-click installation master. Click on Fat Claw Installation Master homepage:. Then click Download Now to download the software. Note that downloading this software requires closing Tencent Butler, 360 Antivirus and other software in advance. Prevent false alarms from the system.

2. After downloading and opening the software, insert the U disk that needs to be made, and the software will automatically detect the U disk information. Then set the production mode to "usb-hdd" and the format to "ntfs", then click "Make U Disk Startup Disk" and go to the next step;

3. This time the editor wants to install win10 system. Therefore, always find the version you want to install in the Windows 10 system options, then click "Start Production" below, and then click "OK" on the warning page;,

4. Afterwards, the software will automatically download the pe module , and make the U disk into the pe system, friends only need to wait for a few minutes;

5. After the U disk pe installation is completed, the software will automatically pop up the corresponding prompt, and the user can directly click " "Preview" to check whether the USB disk PE is created successfully. If the following picture appears, the installation is successful.

6. After the U disk pe is successfully installed, we also need to know the computer's bios startup interface. Users can directly click the "shortcut key" to view the corresponding bios button of their computer. Friends who don’t know what model their motherboard is can download Master Lu to check it.

7. Press the bios button when booting, and set the USB disk as the first place in the startup item of the bios interface;

8. After entering the USB disk PE system, Select the system where the software was downloaded pre viously and click to start the installation. After the system successfully reads the file and restarts, immediately unplug the U disk to pre vent entering the U disk pe again (this step is very critical). Afterwards, the program will enter automatic installation. Wait a moment and the computer system will be installed.

The above is the repair method for computer 0xc0000428, which cannot enter the system and cannot be pre ssed even by pre ssing F8. Users who have encountered the same problem can refer to the steps introduced in this article to repair it. I hope it can be helpful to everyone.